"Measure Twice and Cut Once"

TWO THINGS YOU NEED TO KNOW FOR YOUR VACUUM TOOL CADDY ORDER: 1) Vacuum circumference [the measurement around your vacuum]  2) Tool size diameter [ approx. 1.25" or 2.5"] AND  then Order Here

IMPORTANT TIPS FOR BELT SIZING: There are 3 available belt sizes for the 360 VacCaddy^tm (see chart below).

CORRECT sizing of the 360 VacCaddy^tm vacuum tool caddy storage system for your vacuum will ensure best performance and results. Sizing your vacuum cleaner for the correct vacuum caddy belt size is determined by measuring the level circumference of your vacuum cleaner where the belt will likely be mounted, NOT the gallon capacity. Recommended mounting location is at the most vertically true and smooth surface of the tank body - usually just below the hose intake port on the tank body.

NOTE: For ALL compatible vacuums, the minimum circumference is 27 inches and maximum circumference is 57 inches - please see chart below. KISS Innovations can not be responsible for incorrect sizing that requires a belt exchange - additional charges will apply in those cases.

The 360 VacCaddy^tm vacuum tool caddy can also be mounted on a sliightly to moderately tapered vacuum body as well, but if there is a more vertical contour on the tank body, measuring the tank body for mounting at that location is recommended for best results.

The 360 VacCaddy^tm is not recommended for vacuum cleaners that have large cut-aways or ribbed contours on the tank body. NOTE: PLEASE carefully read all steps and see illustrations below for correct belt sizing AND Click Here for examples of installation.

STEPS TO DETERMINE CORRECT BELT SIZE OF 360 VacCaddy™ FOR YOUR VACUUM CLEANER. If you do NOT have a flexible or cloth tape measure, the following items can be used- 6ft. of string, twine, light cord or similar material and a tape measure. Follow the illustrated steps below.